After Builders Cleaning
- Home
- /
- Services
- /
- after Builders Cleaning
Residential & Commercial After Builders Cleaning in Officer
After builders cleaning is the specialised deep clean performed once construction or renovation work is complete. It removes construction dust, paint splatter, grout haze, adhesive residue, silicone smears and builders debris from every surface throughout the property, leaving it safe, clean and ready to live in or present for sale.
This is not a standard house clean. Construction dust is chemically different from household dust. It contains fine particles of silica, calcium carbonate, gypsum, cement and timber that bond to surfaces, damage finishes if cleaned incorrectly and pose genuine health risks if inhaled. Cleaning a post construction home requires commercial HEPA filtered equipment, professional grade products matched to each surface type and knowledge of what can and can’t be used on newly installed finishes.
Mommy Bear Cleaning Services provides professional after builders cleaning across Officer, Pakenham, Berwick, Beaconsfield, Clyde North, Cranbourne, Narre Warren and surrounding south east Melbourne suburbs. We’re based at 13 Brittanica St, Officer VIC 3809, in the heart of one of Melbourne’s fastest growing residential construction corridors.
What's the Difference Between a Builders Clean and a Regular House Clean?
A regular house clean deals with everyday dust, dirt and grime. An after builders clean deals with construction specific contaminants that regular cleaning products and household equipment can’t handle.
| Factor | Regular house clean | After builders clean |
|---|---|---|
| Dust type | Household dust (skin cells, fabric fibres) | Silica, gyprock, plaster, cement, timber particles |
| Equipment needed | Household vacuum, mop, cloths | Commercial HEPA vacuum, microfibre systems, professional solutions |
| Paint splatter | Not applicable | Removed from glass, tiles, fittings using professional blade technique |
| Grout haze | Not applicable | Specific grout haze remover for tile type |
| Adhesive and sticker residue | Not applicable | Solvent based removal without surface damage |
| Cabinet interiors | Surface wipe | Full vacuum and wipe of every drawer, shelf and runner |
| Window tracks | Quick wipe | Vacuumed, scrubbed and detailed |
| Time required | 2 to 4 hours | 8 to 16+ hours depending on property size |
| Health risk | Minimal | Silica dust is a documented respiratory hazard |
The critical difference is the dust. Construction dust contains respirable crystalline silica from concrete, tiles, bricks and engineered stone. According to Safe Work Australia, silica dust is one of the most significant occupational health hazards in the construction industry. While the greatest risk is during active cutting and grinding, settled silica dust that gets disturbed during cleaning still poses a respiratory risk, particularly for children, elderly people and anyone with asthma.
What Does an After Builders Clean Include?
Every after builders clean we complete follows a systematic top to bottom, room by room approach.
Full property dust extraction. Before any surface is wiped or mopped, every room gets a complete dust extraction pass using commercial HEPA filtered vacuum equipment that captures particles down to 0.3 microns. A household vacuum lets fine construction dust straight through its filter and back into the air.
Kitchen. All cabinet and drawer interiors vacuumed and wiped. Benchtops cleaned. Sink and tap fittings cleaned. Splashback wiped. Appliance surfaces cleaned. Adhesive and tape residue removed. Floor vacuumed and mopped with a product appropriate for the floor type.
Bathrooms. Tiles cleaned and grout haze removed using the correct product for the tile type. Shower screens cleaned and any protective film residue removed. Toilet cleaned and sanitised. Vanity, basin and tap fittings cleaned. Floor mopped.
All living areas and bedrooms. Floors vacuumed (multiple slow passes for carpet) or dust mopped and cleaned (timber, hybrid, tile). Skirting boards wiped. Door frames and handles cleaned. Light switches and power points wiped. Built in wardrobes vacuumed and wiped inside and out.
Windows and glass. All internal and accessible external glass cleaned. Paint splatter removed from glass using professional blade technique at the correct angle with appropriate lubrication. Window tracks vacuumed, scrubbed and wiped. Sliding door runners cleared of grit.
Light fittings and air vents. Ceiling fan blades, light fittings and air conditioning vents dusted and wiped. Construction dust in HVAC vents can recirculate through the home for months if not cleaned at this stage.
Outdoor areas. Entry, porch or balcony swept and mopped. Cobwebs removed from eaves. Front door and surrounds cleaned.
Debris removal. Any remaining construction debris, packaging and materials are removed from the property.
Understanding Construction Cleaning Stages
If you’re working with a builder on a new home or major renovation, it helps to understand the three standard cleaning stages.
Rough clean (during construction). A basic clean done by the builder’s team between construction stages. Large debris is removed, floors are swept and the site is made safe for the next trades. This is not a finished clean.
Builders clean / sparkle clean (at practical completion). A more detailed clean done once all construction is finished but before handover. This covers visible surfaces, floors, windows and fittings. Some builders include this in their contract; others don’t. The quality varies enormously.
Final clean / move in clean. The thorough, professional grade deep clean that makes the property genuinely ready to live in. This is what we provide. It goes far beyond a builders clean and covers inside cabinets, between window panes, behind fixtures, air vents and every surface that accumulated dust during the build.
If your builder has arranged a “builders clean” as part of the contract, you may still need a professional final clean before moving in. Builder arranged cleans are often surface level and leave significant dust in cabinet interiors, window tracks, air vents and behind appliances.
How Much Does After Builders Cleaning Cost?
How Much Does After Builders Cleaning Cost?
After builders cleaning costs more than a standard house clean because it takes significantly more time, requires specialist equipment and involves surfaces that need careful handling. Here’s what properties in Officer, Pakenham, Berwick and surrounding suburbs can typically expect in 2026.
| Property type | Typical price range |
|---|---|
| 2 bedroom apartment or unit | $400 to $650 |
| 3 bedroom house (new build or renovation) | $600 to $1,000 |
| 4 bedroom house | $800 to $1,300 |
| 5+ bedroom or large home | $1,200 to $2,000+ |
| Townhouse or duplex | $500 to $900 |
| Commercial fit out (per quote) | Based on floor area and scope |
These prices include GST, all cleaning products, equipment and debris removal.
What affects the price: Property size is the starting point, but the extent of renovation work matters more. A full new build with every surface covered in dust costs more than a bathroom renovation where the rest of the house was sealed off. The number of bathrooms, size of windows, floor types and whether the builder has done a rough clean before we arrive all affect the final quote.
Common Mistakes Homeowners Make After Renovations
Wiping surfaces before vacuuming. This grinds fine grit across glass, benchtops and finished surfaces, creating micro scratches visible in direct light. Always extract dust first, then wipe.
Using a household vacuum without a HEPA filter. Standard vacuum filters can’t capture construction grade fine dust. The particles pass straight through and recirculate, meaning you’re redistributing dust around the house rather than removing it.
Using vinegar on new grout. Fresh grout needs 48 to 72 hours to cure. Acidic products dissolve the surface layer, weakening the grout and creating a porous surface that stains easily.
Mopping timber or hybrid floors with too much water. New timber and hybrid floors are particularly vulnerable. Excess moisture seeps into joints and edges, causing swelling and warping. Use a damp (not wet) microfibre mop and a product suitable for the floor type.
Scraping paint off glass with the wrong technique. Using a blade at the wrong angle, or on dry glass, permanently scratches the surface. Professional glass cleaning requires the correct blade angle, adequate lubrication and steady pressure.
Ignoring cabinet interiors. Construction dust settles inside every drawer and cupboard during a build. Moving in and filling kitchen cabinets with plates and food without cleaning the interiors first means your belongings sit directly on plaster dust and sawdust.
Moving in before dust has fully settled. Fine construction dust remains airborne for 24 to 48 hours after cleaning. We recommend allowing a day between the clean and moving furniture or belongings in.
Why Officer Properties Need Specialist Construction Cleaning
Officer sits in the heart of the Cardinia growth corridor, one of the most active residential construction zones in Melbourne. New estates are being developed continuously across Officer, Pakenham, Clyde North and Cranbourne, and established homes throughout Berwick, Beaconsfield and Narre Warren are being renovated and extended.
This means two things for homeowners. First, if you’ve just built or renovated, your property has accumulated construction dust that needs professional removal. Second, even if your own home wasn’t under construction, nearby building activity generates fine dust that migrates through the neighbourhood and settles on properties in the surrounding streets.
The clay soils across Officer and the south east corridor compound the issue during wet months, as construction mud gets tracked through properties and into finished areas.
Best Solution for Your Home & Business Cleaning
Call Anytime
0449 626 424
Get Free Quote
why we are different
Why Choose Mommy Bear Cleaning
From stain and odour removal to deep steam cleaning and sanitising, we deliver exceptional upholstery cleaning with honest pricing, eco-friendly products and attention to every detail.
Based at 13 Brittanica St, Officer VIC 3809. We're not travelling from the other side of Melbourne. Faster response, better pricing and genuine familiarity with the construction activity across Officer, Pakenham, Berwick and surrounding suburbs.
Public Liability and WorkCover. Working on newly completed properties means working around brand new finishes, fixtures and surfaces. Full insurance matters.
Family owned, police checked, eco friendly products. The same team that cleans homes, offices, windows, gutters and solar panels across Officer every day.
Book Your After Builders Clean
Professional after builders cleaning to remove dust, debris, and construction residue, leaving your property spotless and move-in ready. Call 0449 626 424 or book online today.
Common Questions
Most Popular Questions
A standard 3 bedroom house after a renovation or new build typically costs $600 to $1,000 in Officer and surrounding south east Melbourne suburbs. Smaller apartments start from around $400 and larger homes range from $1,200 to $2,000+. The final cost depends on property size, extent of construction work and whether the builder completed a rough clean before handover.
A 3 bedroom house typically takes 8 to 12 hours for a professional team. Larger properties or those with extensive construction work can take a full day or longer. The time is driven by the dust extraction process, which must be thorough before any surface wiping or mopping begins.
Book once all construction work is complete, all trades have finished and the builder has done their rough clean (removing large debris and sweeping). Ideally, schedule the professional clean 2 to 3 days before you plan to move in, to allow any residual airborne dust to settle and be removed.
Fine construction dust can contain respirable crystalline silica, which is classified as a serious respiratory health hazard by Safe Work Australia. It also commonly contains plaster particles, wood dust, fibreglass fibres and adhesive residue. Children, elderly people and those with asthma or respiratory conditions are particularly vulnerable. Professional HEPA filtered vacuuming removes these particles rather than redistributing them.
Yes. We use professional glass blades at the correct angle with appropriate lubrication to remove paint splatter without scratching the glass. This is one of the most common areas where DIY attempts cause permanent damage, as incorrect blade angle or dry scraping scratches the surface.
Yes. Construction dust settles inside every cabinet and drawer during a build. We remove all drawers, vacuum the interiors, wipe down runners and surfaces with microfibre cloths and ensure every storage space is clean before you put anything inside.
A builders clean (or sparkle clean) is typically a surface level clean arranged by the builder at practical completion. It covers visible areas but often misses inside cabinets, window tracks, air vents and behind fixtures. An after builders clean (or final clean) is the comprehensive, professional grade clean that makes the property genuinely move in ready.
Yes. We service commercial post construction cleaning across Officer, Pakenham, Dandenong and surrounding areas. Commercial fit outs, office refurbishments and retail renovations are quoted individually based on floor area, scope and timeline.
You can attempt it, but the results are typically inferior. Household vacuums lack HEPA filters, meaning fine dust gets recirculated. Incorrect cleaning products can damage new tiles, grout, timber and painted surfaces. Professional cleaners have the equipment and knowledge to handle construction specific contaminants safely.
In most cases, the property is move in ready immediately. We recommend allowing 24 hours for any residual airborne particles to settle, then doing a quick surface wipe before unpacking.
Yes. Construction dust enters HVAC systems through open ductwork during the build. We clean accessible air conditioning vents, returns and grilles as part of every after builders clean. If the ductwork itself needs professional cleaning, we'll recommend a specialist.
Areas We Serve for After Builders Cleaning
Mommy Bear Cleaning is based at 13 Brittanica St, Officer VIC 3809, giving Officer properties our fastest response times and local understanding of the construction activity across this growth corridor. From our Officer base we provide after builders cleaning across Pakenham, Beaconsfield, Upper Beaconsfield, Berwick, Clyde, Clyde North, Cranbourne, Cranbourne East, Narre Warren, Narre Warren South, Hallam, Endeavour Hills, Hampton Park, Dandenong, Dandenong South, Officer South, Cardinia, Emerald and the wider south east Melbourne region. Whether it’s a new build in one of Officer’s developing estates, a full home renovation in Berwick, a townhouse in Clyde North, or a commercial fit out in Dandenong, our team delivers the same thorough clean with HEPA filtered equipment, surface matched products and complete debris removal. If your property is in Melbourne’s south east and you need post construction cleaning, call 0449 626 424 and we’ll confirm availability.
